View Post

Oil & Gas

In Applications, Oil & Gas by admin

The wide variety of energy needs involved in oil and mining, including supervisory control and data acquisition (SCADA) and telemetry, make solar energy a cost effective way to provide power to production sites.

View Post

Cathodic Protection

In Applications, Oil & Gas by Aerel Rankin

Cathodic protection (CP) controls the corrosion of a metal surface and is used extensively in the oil and gas industry. Cathodic protection systems are most commonly used to protect steel, …

View Post

Oil & Gas

In Case Studies, Cs -Oil & Gas by admin

The systems are partially assembled to facilitate transportation. For easy assembly in the field, the control subsystem is pre-assembled into the battery enclosure. Careful component selection results in a solar power system with a lifetime exceeding 25 years with battery replacements every five to ten years.

View Post

Mining

In Case Studies, Cs -Oil & Gas by admin

PCE Pacific, Inc., and SunWize partnered to provide a power solution to a goldmine operator for a leak detection system at a tailings pond. The equipment to be powered consisted of I/O and SCADA radios in a high US desert environment at approximately 5000-6000’ above sea level.

View Post

Weather Monitoring

In Case Studies, CS - Sensor Monitoring by admin

Customized solution of power system components to meet existing infrastructure site constraints.
SunWize worked with their customer, SEC Automation, to provide power in remote sites for dissolved oxygen (D.O.) monitoring sites at two hydro plants for the Indiana Utility Regulatory Commission

View Post

Water Monitoring

In Case Studies, CS - Sensor Monitoring by admin

Design summaries, created by SunWize, assisted SEC with the building and configuration of the solar powered D.O./radio control systems. Two separate systems consisting of two solar powered remote radios, D.O. analyzers and a master ModBus radio were installed at key locations along the river.